丝管式冷凝器与传统翅片冷凝器相比的优越性: The advantages of Wire-on-tube condenser compared with fin condenser:
1.解决了异种金属相互接触腐蚀性问题 1. wire on tube condenser can solve the problem of
corrosion of dissimilar metals. 2.丝管...
丝管式冷凝器与传统翅片冷凝器相比的优越性:
The advantages of Wire-on-tube condenser compared with fin condenser:
1.解决了异种金属相互接触腐蚀性问题 1. wire on tube condenser can solve the problem of
corrosion of dissimilar metals.
2.丝管式冷凝器管道从头到尾一体弯制成形,系统流动阻力更小,更利于系统回游2. Wire
on tube condenser made from one curved pipe from stem to stern. The flow
resistance from the system will be smaller.
3.易于清洗,同时外部风阻系数更小 3. Wire on
tube condenser is easier to clean. The external drag coefficient is smaller.
4.成本低廉,只有不到翅片2/3的价格 4. The cost of wire on tube condenser is cheaper. It’s
2/3 less than fin condenser.
5.因铜价的不断提升,现市场上铜管壁厚大约0.27mm,而铁管则为0.71mm,耐压性能更强。5. The price of copper is
climbing up. So the thickness of copper pipe is about 0.27mm in market., while
the thickness of steel pipe is 0.71mm. The pressure resistance is stronger.
我公司现有常规型号能配置<100w—736w>功率的压缩机。
The power of compressor is
available from100W to 736W.
我司也能为客户精心设计一款符合客户要求的丝管式冷凝器,客户只需给出以下数据供我们参考,便能完成设计:
We can produce
according to drawing or sample supplied by clients, also can help clients design
different condensers according to the below data:
1.系统制冷剂流量 1. The flux
of refrigerant.
2.测试工况:a. 环境温度 b. 相对湿度 2. Test condition: a.Ambient
Temperature b. Relative Humidity
3.标准蒸发温度 3. Standard evaporation
temperature
4.箱内温度 4. Inside temperature
5.安装空间位置 5. Installation
location